Installation Guide

Fasten the stopper and the rollers.Slide the door panel and check the position of the
stoppers in the running rail. Secure them temporarily in place, and then fasten the rollers using
a Hex key 3/32" and 5/32".
Note:Hex key 3/32" to stop the roller moving as fasten the rollers.
STEP 19
Seal the door assembly:
Apply silicone between the bottom of the xed panel and the base. Silicone application along
the wall channel is also suggested. ln both cases, it is done from the outside of the shower area.
24Hours
Keep the entire area d for a minimum of 24 hours
Your installation is now complete.
18