Installation Guide

Fasten the running rail. Secure the outer pa of the wall bracket. Attach the running rail to the

xed panel using the glass holders. Secure them temporarily in place.

STEP 15

Install the bottom guide.

Use the positioner to determine the bottom guide's position as illustrated in step 1. Drill holes

with a Ø5/16" drill bit as shown in step 2. Fasten the bottom guide according to the holes from

the above steps using Ø8 wall plugs and ST4.8*38 screws, as illustrated in steps 3 and 4.

STEP 16

Please review the bottom. Position the black rubber pa to match the thickness

of the glass. This bottom comes in 4 dierent thicknesses. Ensure that the

thickness of the glass aligns with the corresponding black rubber pa. Fasten

the bottom guide as illustrated.