Installation Guide

14
Measure and cut the Bottom Track.
Measure from one wall to the Wall Channel
at the bottom. Mark the Bottom Track at the
determined distance, then cut it from the
end. Smooth out the rough edges (being
careful to avoid damaging the nished
suaces). The cut Bottom Track should t
ush between the walls without the need
for hand pressure.
STEP 7
STEP 8
Drill holes for the Bottom Track with a
1/4" drill bit.
Install the wall plugs.
STEP 9
Install the Bottom Track. Secure the
Bottom Track using ST3.5x35 screws in the
holes as described in the previous steps.
STEP 10