Installation Guide
Install the door panel. Install the sliding door, ensuring that the rollers are xed over the
running rail. Ensure that the sliding door is placed within the bottom guide.
STEP 17
Install the handle as shown in the illustration.
Install the door gasket and gap gaskets. Inse
the door gasket on the wall side. Inse another
gap gasket on the other side of the glass door.
Inse another gap gasket on the xed panel.
Install the Glass x nails as illustrated.
STEP 18
9
Cut the gap gaskets
as illustrated.
Measure and cut the Bottom Track Cover. Measure from the wall to the xed panel at the
bottom track. Mark the Bottom Track Cover at the determined distance and cut it from the end.
Smooth out the rough edges where the Bottom Track Cover was cut, taking care to avoid
damaging nished suaces. The cut Bottom Track Cover should t ush between the walls
without the need for hand pressure.
Install the Bottom track cover as illustrated.