User Manual

further advanced digital filtering options are available via internal

jumpers. The different digital formats are selectable by pressing

SHIFT + DIG in cycle mode.

• BLUETOOTH: This input features the same architecture found in the

acclaimed Heritage Audio BT-500. If you are not familiar with it, the

BT-500 is an Audio Streaming device in a convenient 500 Series

format. It streams audio from your Bluetooth-equipped device and

delivers a fully balanced, +22dBu stereo output. Integration of mobile

devices intro a professional studio environment has never been

easier. More info on the Bluetooth features later.

MONITORING OUTPUT FEATURES

The RAM System 5000 features 5 pairs of balanced outputs labelled OUT1,

OUT2, OUT3, OUT4 and OUT5 available via discrete XLR connectors on the

back of the unit. Depending on 5.1/ST and LFE mode configurations, Outputs

1 to 3 represent the 5.1 system or are simply individual stereo outputs.

As has been said previously, OUT 2 R can be a permanent subwoofer output

depending on configuration. In case OUT 2 seems to not be working properly,

please check this configuration first.

ADDITIONAL OUTPUTS

In addition to the monitoring outputs, the RAM System 5000 features the

following outputs:

• MIX OUTPUT: It follows the input signal and is taken PRE FADER,

meaning its level is unaffected by the monitoring attenuation. It is

therefore ideal for recording the mix at the same time, or as an

additional cue send. It is unity gain.

• CUE OUTPUTS 1-4: Working in tandem with the CUE INPUTS 1-4, they

work as traditional CUE sends, where the CUE Output follows the

CUE input plus the Talkback signal when this is in use.