User Manual

2
INSTALLING THE RAM SYSTEM 5000
Thanks for purchasing the RAM System 5000. Please make sure the following
items are in the box when you open it.
• This manual.
• RAM System 5000 main unit.
• RAM System 5000 remote unit.
• Power Supply labelled HA-PSU02.
• 3x Bluetooth antenna.
• IEC Cable.
• USB cable.
Depending on your system requirements, you will need several XLR, RCA,
DSUB snakes and digital cables to hook up your system. Please check your
input sources and output destinations and get yourself the correct cables.
Additionally, please insert the wireless antennas in their threaded connectors
in case they come unplugged from the factory.
The power supply is of the auto switching universal type so it works
worldwide without adjusting anything. In case your country uses a different
mains cable other than the one provided in the box, just get the correct one
and you are done.
The remote unit is operated by means of an internal rechargeable battery,
similar to that found in your mobile phone. A charging dock comes included
in the main unit, as is the USB cable. A red LED on the back of the remote unit
will light when being charged and the unit can be fully operated while in
charge mode. It is recommended to completely charge the battery on its first
use.
Please turn on the main unit and the remote unit thereafter. A “Connecting”
message will display and, if connection is successful, a message will display
shortly thereafter.