User Manual

You Tube hosts nice tutorials about how to do so in both Android and iOS if

you need help.

The System 2000 automatically selects the best Codec supported by your

mobile device, so no configuration is needed.

OPERATION

Whenever a device is paired with the RAM System 5000, the “SYNC” LED will

light. From then on, your mobile device takes over the transmission, including

Transport control (PLAY, STOP, etc.) and Level (Volume).

Active streaming is confirmed by corresponding Codec LED being turned on.

Please note Codec IS NOT configurable. It is automatically chosen from the

best available option on your mobile device.

Devices can only be paired one at a time. Whenever a different device needs

to be paired, Bluetooth needs to be reset, so RESET button must be pressed

down.

SUMMARY OF SOFT FUNCTIONS

While main functions in the RAM System 5000 are simply accessible by

pressing the corresponding key, several others are accessible as a

combination, employing the SHIFT key for this purpose. These have been

described all along this manual, however for easy recall, they are listed

below:

• SHIFT + IN 1: Configures the 5.1/ST mode of operation.

• SHIFT + IN 2: Configures the SUB output behavior.

• SHIFT + MUTE L, C, R, RL, SUB, RR: Solos the related speaker.

• SHIFT + DIG: Switches the digital input in between AES/EBU, Spdif or

Toslink.

• SHIFT + OUT 1: Sets the Level Preset 1.