User Manual

OPERATION

Whenever a device is paired with the RAM System 2000, the “SYNC” LED will

light. From then on, your mobile device takes over the transmission, including

Transport control (PLAY, STOP, etc.) and Level (Volume).

Active streaming is confirmed by corresponding Codec LED being turned on.

Please note Codec IS NOT configurable. It is automatically chosen from the

best available option on your mobile device.

Devices can only be paired one at a time. Whenever a different device needs

to be paired, Bluetooth needs to be reset, so SHIFT + BT buttons must be

pressed down.

SUMMARY OF SOFT FUNCTIONS

While main functions in the RAM System 2000 are simply accessible by

pressing the corresponding key, several others are accessible as a

combination, employing the SHIFT key for this purpose. These have been

described all along this manual, however for easy recall, they are listed

below:

• SHIFT + IN 3: Turns IN 3 from balanced +4 dBu nominal to unbalanced

-10 dBV nominal. Pressing again does the opposite.

• SHIFT + BT: Resets the Bluetooth connection.

• SHIFT + MUTE L: Solos the speaker L.

• SHIFT + MUTE SUB: Solos the SUB.

• SHIFT + MUTE R: Solos the speaker R.

• SHIFT + OUT 1: Sets the Level Preset 1.

• SHIFT + OUT 2: Sets the Level Preset 2.

• SHIFT + OUT 3: Saves level preset (confirmation of preset 1 or 2

needs to follow).

• SHIFT + MUTE: Activates MONO listening.

• SHIFT + TB MIX: Lowers the talkback mic gain.