User Manual

4
• BLUETOOTH: This input features the same architecture found in the
acclaimed Heritage Audio BT-500. If you are not familiar with it, the
BT-500 is an Audio Streaming device in a convenient 500 Series
format. It streams audio from your Bluetooth-equipped device and
delivers a fully balanced, +22dBu stereo output. Integration of mobile
devices intro a professional studio environment has never been
easier. More info on the Bluetooth features later.
MONITORING OUTPUT FEATURES
The RAM System 2000 features 3 pairs of balanced outputs labelled OUT1,
OUT2 and OUT3, available via TRS jacks on the back of the unit.
An additional SUBWOOFER output is available on a balanced TRS as well. It
follows the input selected, and outputs a mono, unfiltered combination of
both channels.
ADDITIONAL OUTPUTS
In addition to the monitoring outputs, the RAM System 2000 features the
following outputs:
• MIX OUTPUT: It follows the input signal and is taken PRE FADER,
meaning its level is unaffected by the monitoring attenuation. It is
therefore ideal for recording the mix at the same time, or as an
additional cue send.
• CUE OUTPUT: Working in tandem with the CUE INPUT, it works as a
traditional CUE send, where the CUE Output follows the CUE input
plus the Talkback signal when this is in use.