User Manual

3
GENERAL DESCRIPTION
The Heritage Audio RAM SYSTEM 2000 is a professional monitor controller in
a convenient tabletop format. With its matrix of inputs and outputs, covering
balanced and unbalanced analog, Spdif digital and the innovative
professional quality HA Bluetooth technology, the System 2000 will cover all
the monitoring needs of the most demanding professional facilities at a price
never heard before.
The level control is taken care of by means of microprocessor controlled gold
plated relays, giving an exceptional resolution of 64dB of attenuation in 1dB
steps. Keeping active electronics to a minimum, the attenuator is buffered
using state of the art Burr Brown circuitry for negligible coloration and no
noise.
Headphone monitoring is as critical as main speaker is. Usually a weak part
even in the most expensive units, the RAM System 2000 employs very high
current drivers in a diamond buffer configuration which are able to drive any
headphones to very high levels without coloration or noise. It has 2 amplifiers
individually configurable.
INPUT FEATURES
The RAM System 2000 has the following stereo inputs:
• INPUT 1: Balanced, accessible on a pair of TRS Jack connectors.
• INPUT 2: Exactly as Input 1.
• INPUT 3: Balanced by default, it can be configured as unbalanced -
10dBV by pressing SHIFT + IN3. The same key combination would
return this input to its balanced +4 configuration.
• DIGITAL: Transformer isolated, it is available on the RCA connector
on the back of the unit. It is able to read signals up to 24 bit/ 96Khz
and gets the word clock from the input source.