User Manual

TROUBLE SHOOTING
PROBLEMS
SOLUTIONS
There is almost no sound coming from the SUCCESSOR.
Make sure you have raised the GAIN MAKE-UP to a
sufficient level to recover from any gain reduction taking
place.
There doesn %t seem to be any compression occuring.
Make sure you have adjusted the THRESHOLD level to a
reasonable setting as well as selecting an appropriate
RATIO for the signal.
I %m getting way too much compression for what I need and
it´s too aggressive.
Try adjusting the THRESHOLD and/or RATIO to alter the
amount and/or intensity of the compression.
I %m still getting way too much compression for what I
need.
Try adjusting the SC FILTER to make the SUCCESSOR
less sensitive to the lower frequencies.
The compression I am getting is still altogether too
aggressive for what I am looking for.
Try different settings on the ATTACK and RELEASE
controls to soften the effect.
The readings on the VU meter don %t seem to correspond
with what is actually happening.
Sounds like it %s time for some calibrating.
The is no compression happening.
Make sure you have pressed the ´DYNAMICS IN´ button.
I need to do some very special frequency dependent
compression.
Push the ´EXT SIDECHAIN´ button and make sure you
have connected a (e.g., graphic equalizer) and adjusted it
accordingly." ""
There seems to be no compression happening in spite of
the drastic settings I´ve chosen.
Check to see if you have left the BLEND control all the
way CCW, in the DRY position.
I´m having trouble determining the correct RELEASE time
for the material I’m processing.
Try the automatic release times A1 and/or A2.
10
* For any further doubts or questions please get in contact with us at: [e-mail]!