Operation Manual

WAE
8/12 – User Manual
2.4. Connecting another music source
You can connect any other music source to your speaker: for example, an iPod, other type
of MP3 player or a mobile phone. To do so:
1- Connect one end of a male mini-jack (3.5 mm) cable (not included) to the
auxiliary input connector (8), and connect the other end of the cable to the audio
output on your music source.
2- Press the audio source selection button (1): the indicator lights up.
3- Set your external music source to the maximum volume, and use the volume
buttons on the speaker or the remote control to adjust the sound level.
Note: To switch back to wireless audio mode, simply press the audio source selection
button (1) again.
2.5. Recharging the battery
Your speaker is equipped with a rechargeable battery. We strongly recommend that you
completely discharge the battery when using the speaker for the first time. To do so, leave
the speaker powered on (with the sound active or not) until the speaker completely runs
out of power.
To recharge the battery: connect the power supply to its connector on the speaker (7), and
then plug the power supply into an electrical outlet.
The battery charge level indicator (5) lights up while the battery is charging, and turns off
when the battery is fully charged.
3. TROUBLESHOOTING
Scenario 1: Wireless audio playback is not working, the USB dongle's connection indicator
(18) or the speaker's On/Off indicator (4) is flashing.
This indicates that the speaker and the USB dongle are not paired. To resolve this
problem, do the following: