Operation Manual

WAE
10/12 – User Manual
If the procedure was successful, the source selection indicator (1) turns off.
The source selection indicator (1) flashes during the pairing of the remote control, and
turns off after a short period of time. If you have not succeeded in pairing the remote
control during this period of time, restart the procedure.
B- Change the battery in the remote control:
1- Open the battery compartment cover using a small screwdriver.
2- Remove the CR2025 type battery and replace it with a new battery of the same
type. Respect the polarity sign indicated on the metal tab of the electronic card
(inside the remote control) that is in contact with the battery.
3- Replace the battery compartment cover.
4- Pair the remote control as explained in point A.
4. TECHNICAL SUPPORT
If you encounter a problem with your product, please go to http://ts.hercules.com and select your
language. From there you will be able to access various utilities (Frequently Asked Questions (FAQ),
the latest versions of drivers and software) that may help to resolve your problem. If the problem
persists, you can contact the Hercules products technical support service (“Technical Support”):
By email:
To reach our Technical Support via email, you must first register online on the http://ts.hercules.com/
website. The information that you provide will help our technicians to resolve your problem as quickly
as possible.
Click on Product Registration and follow the instructions displayed onscreen.
If you have already registered your product, please enter your user info in the Username and
Password fields, then click on Login.