Operation Manual

ESPAÑOL
PORTUGUÊS
РУССКИЙ
ENGLISH
FRANÇAIS
DEUTSCH
NEDERLANDS
ITALIANO
TÜRKÇE
POLSKI
ΕΛΛΗΝΙΚΑ
WAE-WBT06
User Manual – 7/16
2.3. Pairing a Bluetooth® device
"Pairing" means connecting a smartphone or a Bluetooth® device to your speaker, in order to
establish a communication. When two devices are paired, the relevant information is stored in both
devices' memory. Once a device has been paired with the speaker, it doesn't need to be paired again.
The speaker can store information about up to 8 devices.
Step 1: Turn the speaker on, if you haven't already done so.
The On/Off indicator light (4) turns on and remains lit.
If it doesn't light up, please refer to section 3, further in this manual.
Step 2: Press the input selection button (1); the connection status indicator light turns orange and
flashes quickly.
Step 3: Open your device's Bluetooth® management feature. If using an iOS device, select Settings /
General / Bluetooth®.
Activate your device's Bluetooth® feature and wait for the speaker to appear in the list of detected
devices.
Locate the WAE-WBT06 speaker, then tap on it to connect to it.
After a short wait, the connection is set up; the device should now appear as Connected in your
device's Bluetooth® management feature.