Operation Manual

19/24
9 - WORKING WITH LOOPS
9.1 Creating a loop
Select LOOP mode.
Press pads 1 through 8 to pour activate a loop with a preset size that beatmatches the
track (vertical bars = BPM).
Pad 1 = 1/16 beat / Pad 5 = 1 beat / Pad 8= 8 beats.
Press again the corresponding pad to deactivate the loop.
DJUCED™ 40° plays a part of the track as a loop.
9.2 Increasing or decreasing the length of the loop
Using the encoder you can change the length of the loop:
- Clockwise= length x2
- Anti-clockwise = length /2