User Guide

FRANÇAIS ESPAÑOLITALIANOHOTLINE PORTUGUÊSNEDERLAND ENGLISHDEUTSCH
User Manual – 5/16
3.1.2. Prophetview 920DVi
- Connect the DVI cable to the DVI output on your graphics
board.
If you wish to connect the Prophetview 920DVi
to a VGA output:
- Connect the supplied DVI / VGA adaptor to the DVI cable.
- Connect the DVI / VGA ada
p
ter to the VGA out
p
ut on
y
our
graphics board.
- Connect the AC adapter cable to the power terminal at the
back of the monitor base.
- Connect the power cord to the AC adapter.
- Plug in the monitor’s power cord.
- Switch on
y
our com
p
uter and monitor
(
for the latter, b
y
pressing the button).
Your Prophetview 920DVi is now ready for use.
3.2. Connecting to a video device (Prophetview 920DVi only)
You can connect other video devices, such as a games console or camcorder, to your
Prophetview 920DVi via the composite video input.
- Connect the video device to the composite video input at the back of the monitor base (connection cable not
supplied).
- Switch on your video device.
Refer to section Selecting the video signal for more information about activating the composite
video input on your Prophetview 920DVi.