User Guide

4/16 – User Manual
3. CONNECTING YOUR PROPHETVIEW 920
Remove your Prophetview 920 from its packaging along with the various different elements
required for installation:
TFT-LCD monitor AC power adapter Power cord
Installation CD-ROM
DVI / VGA adaptor
(Prophetview 920DVi only)
3.1. Connecting to a PC
- Switch off your computer.
- You may also need to disconnect your previous monitor from the system.
3.1.1. Prophetview 920
- Connect the VGA cable to the VGA output on your graphics
board.
- Connect the AC ada
p
ter cable to the
p
ower terminal at the
back of the monitor base.
- Connect the power cord to the AC adapter.
- Plug in the monitor’s power cord.
- Switch on
y
our com
p
uter and monitor
(
for the latter, b
y
pressing the button).
Your Prophetview 920 is now ready for use.