User Guide

FRANÇAIS ESPAÑOLITALIANOHOTLINE PORTUGUÊSNEDERLAND ENGLISHDEUTSCH
User Manual – 11/16
Select a language from among the five available using the or button, and then
press the
or button. The OSD menu is now displayed in the language you
have selected.
Selects a video signal: DVI, VGA or composite video (Prophetview 920DVi only).
Closes the OSD menu.
***
Adjusts image saturation.
* Option only available with VGA input.
** Option only available with VGA and composite video inputs.
*** Option only available with composite video input.
5.5. Selecting the video signal (Prophetview 920DVi only)
Your Prophetview 920DVi can receive either a DVI or VGA-type video signal (via the video cable)
or a composite video signal (via the composite video input). As it is impossible to display several
signals at once, you need to select the input that you wish to use. To do this:
- Press the button to display the OSD main menu.
- Select the
icon.
- Select the input you require (
DVI
if your Prophetview 920DVi is connected to the DVI output of your graphics
board,
RGB
if your Prophetview 920DVi is connected to the VGA output of your graphics board or
VIDEO
if
you have connected a video device to the composite video input) using the
or button.
The display then switches to the selected video signal.