Operation Manual

Hercules ePlug 200 C Hercules ePlug 200 Multi
User Manual – 13/75
4. Connect the Ethernet cable to the Ethernet plug
on your second adapter.
5. Plug the adapter into an electrical outlet located
near the device to be connected to the network.
In order to optimize data transfer on the PLC
network, it is preferable not to plug your adapter
directly into a powerstrip.
6. Connect the other end of the Ethernet cable to the
computer, modem, game console or any other
network device (for example, a computer).
When your adapters are connected, the
LED (connection status) lights up and
indi
cates that the network is functioning
properly. The signal quality is also indicated by
a color code, explained in chapter 1.5. LEDs
overview