Operation Manual

Hercules ePlug 200 Mini V2
User Manual – 27/71
On the adapter already connected to the PC:
- In the Advanced settings tab, enter the new network password in the corresponding field.
- Tick the Apply the password to the device connected to the PC only.
If you tick the Apply the password to the device connected to the PC only box, the
adapter connected to the PC will no longer be part of its previous network.
- Click Change the network name.
- In the warning window, click
.
- Make a note of the network name, then click Close.
On the other adapters:
- Successively connect to your PC each adapter to which you wish to apply the same password.
- Apply the procedure described above to each adapter.
- Plug each adapter back into its original electrical outlet.
3.8. Updating the firmware
To benefit from the latest firmware version, you can visit the Hercules website (http://ts.hercules.com) and
verify whether new firmware is available for your ePlug adapters. Follow the instructions and save the file to
your hard disk drive.