Operation Manual

UMPC EC-900B-H120G/VW
24/40 – User Manual
For more information about the connection status:
The eCAFÉ™ Connect icon appears in the notification area. It provides updated information about the
connection's status:
Internet connection: an Ethernet or WiFi
peripheral is active and physically
connected; Internet access is available.
Your Internet connection is perfectly operational.
Local area connection: an Ethernet or
WiFi peripheral is active and physically
connected; no Internet access is
available.
You are connected to a modem, a router or an
Internet box or to a corporate network; however, this
device or network is not connected to the Internet.
Please check the Internet connection settings on
your local area network or your modem.
Connection problem: an Ethernet or
WiFi peripheral is active and physically
connected; no Internet access is
available.
Please check your network connection settings (IP
address, subnet mask etc.) on your local area
network or your modem. If necessary, contact your
router's or modem/router's vendor.
No connection: an Ethernet or WiFi
device is active but is not connected
physically.
Connect your eCAFÉ™ to a local area network via
the WiFi connection (please refer to the previous
section) or via the Ethernet port.
No peripheral: no Ethernet and/or WiFi
peripheral have been activated.
Activate your peripheral: to activate your WiFi
peripheral, simultaneously press on keys [Fn] and
[F1] on your ultra-mobile personal computer's
keyboard.
If your computer uses the Microsoft Zero Config utility to establish a connection to the WiFi
network:
3.6.2. Using the Microsoft Zero Config utility to establish a
connection to the WiFi network
1. In the windows system tray, click the Wireless Network Connection icon.
2. In the list of available networks that appears, click the desired network, then click the Connect
button.