User's Manual

Table Of Contents

5. Overview of features

5.1. General DJControl Inpulse 500 overview

1. Transport buttons: play/pause, Cue point, SHIFT

2. Performance pads

3. Tempo fader with beatmatching help (glowing red arrows), green LED

showing the original tempo, and SYNC (synchronization) button

4. Loop In/Out (start of the loop/end of the loop), size of the loop, and

Reloop (exit the loop)

5. Mode: Vinyl (scratch), Slip and Quantize

6. Navigation through the music library, buttons to load tracks on the

corresponding deck, Assistant and backlit ring showing the energy level

(in DJUCED

) or the rhythm (in Serato)

7. Gain and 3-band equalizer (HIGH / MID / LOW)

8. Filter/FX: filters and effects

9. Mixing with volume faders, crossfader, and switch to select between 3

different crossfader curves

10. Microphone volume and 2-band equalizer for the microphone input

(hardware functions = independent of the software being used)

11. Aux (auxiliary) input volume and filter on the auxiliary input (hardware

functions = independent of the software being used)

12. Master volume knob and master volume VU-meter (hardware functions =

independent of the software being used)

13. Headphones volume knob and Cue/Master knob to select what you hear

on your headphones (hardware functions = independent of the software

being used)

14. Jog wheel with capacitive touch detection, with beatmatching help

(glowing red arrows)