Operation Manual

VirtualDJ DJC Mk4
rate when moving the fader to the top, and 112BPM when moving the
fader to the bottom).
The pitch scale can be changed by clicking on the pitch percentage figure
displayed above the pitch fader in the VirtualDJ DJC Mk4 software: you
can set a pitch scale of 6%, 8%, 10%, 12%, 20%, 25%, 33%, 50% or
100%.
The lower the pitch scale, the higher the precision of the pitch fader: a low
pitch scale makes the pitch fader more precise, but limits your choice to
music tracks whose BPM is close enough to the BPM of the music already
loaded to be within the pitch scale.
iv) Action of the pitch fader in VirtualDJ
W
hen you move the pitch fader, you can see its action in 2 ways:
- the BPM counter changes (displayed in VirtualDJ DJC Mk4 to the
right of the artist name),
- the scrolling of the music track in the waveform window goes slower
or faster.
However, the best way to note the pitch change is to hear the change in
the music’s speed.
User Manual – 26/39