Operation Manual

VirtualDJ DJC Mk4
ii) Equipment
To preview a music file, you must connect your headphones to the DJ
Console MK4 headphone output, on the front of the device.
iii) Steps
To preview a music file:
- You should preferably use low-impedance headphones (below 64
Ohms), to get a strong output level,
- Load the music file on the deck opposite to the side where the cross
fader is positioned (so that the audience cannot hear the preview),
- Press the Listen A or Listen B button on your DJ Console Mk4 to
preview deck A or Deck B, respectively,
- Preview the music file on your headphones, by pressing the Play
button.
d) Moving within a music track
You can move within a music track using 3 controls:
- Play the music track with the DJ Console Mk4’s Play buttons. This is
the simplest way: just press the Play button of the selected deck on your
controller, and you can hear the track on your headphones at the position
you have reached,
- Move within the track by turning the DJ Console Mk4’s jog wheels.
This is the most precise way: turn the jog wheel backwards and forwards
and you see your position moving in the waveform window,
- Go forwards and backwards by pressing the Fast forward and
Rewind buttons. This is the fastest way: you see your position within the
music track in the small waveform preview placed over the virtual vinyl
record image in the VirtualDJ display.
User Manual – 18/39