Operation Manual

ITALIANO
DEUTSCH
ESPAÑOL
NEDERLANDS ENGLISH FRANÇAIS
User Manual – 15/24
As the piece on Deck B is nearing its end, start moving the cross fader to the left at the same
moment you start up playback on your turntable connected to Deck A. Once the cross fader is
pushed completely to the left, only what is being played on Deck A will be heard by the audience.
Set the headphone output selector to the Mix position or remove your headphones. Now that
your song is playing, you can even scratch the record on your turntable (assuming your turntable
is designed for scratching).
6.10. Getting on the microphone
Have an announcement to make? A dedication? Speak up while your music is playing and talk to
your public! The attenuation function allows you to be heard by reducing the ambient volume.
- Select an attenuation level using the slider (-3, -6 or -9 dB) in the Main tab of the Control Panel.
- Press the microphone volume control knob/talk-over button.
The sound of the music over the speakers decreases and the On Air indicator
lights up in
red in the interface, indicating that your voice will be broadcast over the speakers in the room.
You can now go ahead and address the crowd.
- Once you’ve said what you have to say, press the
microphone volume control knob/talk-
over button once more.
The On Air indicator goes dim. Talk-over is no longer enabled.
For details on how to record using the microphone, please see section 6.3. Using the DJ Console
Mk2 Control Panel.
If the Peak indicator lights up while you’re talking:
This means that the signal being received is too high: the sound from the microphone will saturate
at a certain level, with a resulting loss of sound information.
- Adjust the input volume using the microphone knob.