Operation Manual

ITALIANO DEUTSCH ESPAÑOL NEDERLANDS ENGLISH FRANÇAIS
User Manual – 25/30
8.8. Shift button (for loops/cue/sampler/effects), and buttons 1-6
DJ Console 4-Mx provides the equivalent of 12 buttons per deck for effects, loops and Cue
functions, thanks to the Shift button, which converts buttons 1 to 6 on each deck into buttons 7 to
12. Functions include: loop in, loop out, hot cue 1/2/3/4, sampler record, sampler play and 4
effects.
8.9. Load on Left Deck / Load on Right Deck buttons
Use these buttons to load the highlighted music track in the VirtualDJ software on the
corresponding deck.
8.10. Cue Select Left Deck / Cue Select Right Deck buttons
Use these buttons to choose which deck is being monitored on your headphones, when the
Cue/Mix knob is set to the Cue position: you can use them to select between the 4 available
decks.
8.11. Browser buttons: Up and Down
Use the Up and Down buttons to browse through folders and music libraries: move to the
previous (Up) or next (Down) music file/directory. You can move through music lists more quickly
by pressing the Up or Down button and turning the right jog wheel at the same time.
8.12. Cue/Mix knob
Use the Cue/Mix knob to adjust the level of the track you are cueing up in relation to the overall
mix on your headphones or monitoring speakers. The Cue side of the knob’s rotation represents
the selected deck you are cuing up, while the Mix side represents the mix being played for your
audience.
8.13. Equalization knobs
Use the equalization knobs (Bass, Medium and Treble) for each deck to add color to your music
with custom settings. For example:
- Make dancing easier by enhancing the bass (the bass provides the tempo for dancing).
- Remix songs by boosting the mids (the mids contain the singer’s voice) on one track and
mix
ing it with another track on the other deck, where you’ve cut the mids.
You can also manipulate the bass to make transitions between two tracks:
- Synchronize the 4 tracks.
- Cut out the mids and treble on both
decks, keeping only the beat of the bass.
- Move the cross fader from the first deck to the second, while restoring the mids and treble.