User Guide

NVIDIA Corporation
89
Detonator XP User’s Guide
4 You can use the options Use display adapter scaling and Centered Output
to determine the placement of the image on your flat panel display when
running at resolutions lower than the maximum supported resolution.
Figure 7.15
Digital Flat Panel Display - Centered Output: Windows 2000
Note: The Use monitor scaling option is available for flat panels that support
multiple native resolutions.
Monitor Settings (Refresh Frequency): Secondary
Display
Note: The Monitor Settings option only appears for the secondary display
device (Display 2), if the secondary device is a DFP or CRT (analog
monitor). In this example, the secondary display device is a DFP.
Follow these steps to modify the Refresh Frequency of your secondary display
device:
Note: If you are in the TwinView control panel, right-click the Digital Flat
Panel icon and select Screen Adjustment to display the Flat Panel
Display control panel, click Monitor Settings to open the Monitor
Settings panel, then go directly to step. 4 below.
1 Make sure you are in the Device Selection panel. (See the earlier section
“Accessing the Device Selection Control Panel” on page 79, if needed.)
DetXP_Features.book Page 89 Thursday, October 11, 2001 3:53 PM