User Guide

NVIDIA Corporation
87
Detonator XP User’s Guide
Figure 7.12
Display Timing (Analog Monitor): Windows 2000
4
Select the proper timing mode for your display:
•
Auto-Detect (default setting) allows Windows to receive the proper
timing information directly from the monitor itself. Note that some older
monitors may not support this feature.
•
General Timing Formula (GTF) is a standard used by most newer
hardware.
•
Discrete Monitor Timings (DMT) is an older standard still in use on
some hardware. Enable this option if your hardware requires DMT.
Device Adjustments: Digital Flat Panel
Flat Panel Display
If your NVIDIA graphics card is connected to a DFP (digital flat panel), follow
these steps to access the Flat Panel Display control panel.
Note: If you are in the TwinView control panel, right-click the Digital Flat
Panel icon and select Screen Adjustment to display the Flat Panel
Display control panel. Then go directly to step. 4 below.
1 Make sure you are in the Device Selection panel. (See the previous section
“Accessing the Device Selection Control Panel” on page 79, if needed.)
DetXP_Features.book Page 87 Thursday, October 11, 2001 3:53 PM