User Guide

86
NVIDIA Corporation
C
HAPTER
7 Device Selection & Configuration
Figure 7.11
Screen Adjustments (Analog Monitor): Windows 2000
Display Timing
If your NVIDIA graphics card is connected to a CRT (Analog Monitor), follow
these steps to access the Display Timing panel:
Note: If you are in the TwinView control panel, right-click the Analog Monitor
icon to display the context menu and select Screen Adjustment to
display the Screen Adjustment panel. Then click the Display Timing tab
to open the Display Timing panel and go directly to step. 4 below.
1 Make sure you are in the Device Selection panel. (See the earlier section
“Accessing the Device Selection Control Panel” on page 79, if needed.)
2 Confirm that the Analog Monitor option is selected on the Device Selection
panel.
3 Click the Device Adjustments button then click the Display Timing tab to
open the Display Timing panel.
DetXP_Features.book Page 86 Thursday, October 11, 2001 3:53 PM