User Guide

NVIDIA Corporation
85
Detonator XP User’s Guide
Figure 7.10
Device Selection with DFP Enabled
Device Adjustments: Analog Monitor
Screen Adjustment
If your NVIDIA graphics card is connected to a CRT (Analog Monitor), follow
these steps to access the Screen Adjustment panel:
Note: If you are in the TwinView control panel, right-click the Analog Monitor
icon to display the context menu and select Screen Adjustment to
display the Screen Adjustment panel. Then go directly to step. 4 below.
1 Make sure you are in the Device Selection panel. (See the earlier section
“Accessing the Device Selection Control Panel” on page 79, if needed.)
2 Confirm that the Analog Monitor option is selected on the Device Selection
panel.
3 Click the Device Adjustments button to access the Screen Adjustment panel
(Figure 7.11).
4 To adjust the screen position, move the mouse over the monitor icon and drag
the desktop to the desired position while holding down the primary mouse
button. Use the arrow positioning buttons for fine adjustments.
DetXP_Features.book Page 85 Thursday, October 11, 2001 3:53 PM