User Guide

66
NVIDIA Corporation
C
HAPTER
6 TwinView Basics: Windows XP/2000/NT 4.0
Figure 6.28
TwinView Clone Mode Menu (Display 2=DFP): Windows 2000
Switching Secondary to Primary Display: Clone Mode
Note: The example in this section changes DFP from a secondary to a primary
display.You can use a similar procedure to change TV from a secondary
to a primary display.
1 Make sure you have the TwinView panel open in Clone mode and DFP
selected as display 2.
2 Right-click monitor icon 2 to display the context menu.
3 Select Primary Display. The “Make this the primary display” box becomes
checked.
4 Click Apply. The NVIDIA Display Settings message appears.
5 Click OK before the message times out.
The Confirm Display Settings message and the rest of your Windows
desktop appears on your DFP display.
6 Click Yes before the message times out.
When the TwinView panel appears, Digital Flat Panel is enabled as the
primary display device (Figure 6.29).
DetXP_Features.book Page 66 Thursday, October 11, 2001 3:53 PM