User Guide

NVIDIA Corporation
63
Detonator XP User’s Guide
Switching Secondary Displays: Clone Mode
Note: The example in this section uses TV as the secondary display device and
describes how to switch from TV to Digital Flat Panel. You can use a
similar procedure to switch from DFP to TV.
1 Right-click monitor icon 2 to view the context menu for the secondary
display, which is TV in this example (Figure 6.22).
Figure 6.22
TwinView Clone Mode Menu (Display 2=TV): Windows 2000
2
From the context menu, click Device Selection to select the Device Selection
panel. Figure 6.23 correctly shows TV as the selected output device for
display 2 (secondary display).
For details on configuring TV settings, see “TV Settings” on page 91.
3 Click Digital Flat Panel, as shown in Figure 6.24.
4 Click Apply. The NVIDIA Display Settings message panel appears (Figure
6.25).
5 Click OK before the message times out. The Confirm Display Settings
message (Figure 6.26) and the rest of your Windows desktop appears on your
DFP display.
DetXP_Features.book Page 63 Thursday, October 11, 2001 3:53 PM