User Guide

56
NVIDIA Corporation
C
HAPTER
6 TwinView Basics: Windows XP/2000/NT 4.0
Standard Mode
Note: The Windows 2000 NVIDIA control panel screens shown in this
document also apply to Windows NT 4.0 and XP; exceptions are noted,
where applicable.
The Standard mode option in the TwinView control panel disables the Twin-
View feature allowing viewing in only one display. Figure 6.12 shows a
TwinView panel when only one display device (e.g, Analog Monitor) is
connected to your computer. Notice that the Clone mode option is disabled.
Figure 6.12
TwinView: Std. Mode (single-display) with Context Menu: Windows 2000
Figure 6.13 shows the TwinView control panel in Standard mode with Analog
Monitor (CRT) as the Primary display device (Display 1). If you have a DFP
and/or a TV connected to your dual-display graphics card, you can choose to
display on the DFP or TV instead of the CRT.
DetXP_Features.book Page 56 Thursday, October 11, 2001 3:53 PM