User Guide

NVIDIA Corporation

HAPTER

5 TwinView Basics: Windows 9x

Note: If you do not see the Change Resolution option on the display 2

context menu, adjust (increase) the resolution of the primary display

until the Change Resolution option becomes available from the display

2 context menu.

Figure 5.24

TwinView Clone Mode Device Configuration: Windows 98

Use the slider (Figure 5.24) to set the screen resolution to a value that is not

equal to the screen resolution on the Windows Settings control panel of your

primary display.

Note: If you set the same screen resolution value for both primary and

secondary displays, you cannot use your secondary device for the

Virtual Desktop, i.e., to pan/scan the desktop; both displays will

remain static.

3 Optional: If you want, select a Refresh rate from the list box.

4 Click Apply and OK. Notice that the resolution of your secondary display

changes and you can use your mouse to pan and scan the desktop on this

secondary display.

5 If you want to lock the display position of the secondary display, check the

Disable auto-panning on the clone device (viewport lock) check box on

the TwinView panel (Figure 5.23).

DetXP_Features.book Page 38 Thursday, October 11, 2001 3:53 PM