User Guide

NVIDIA Corporation
37
Detonator XP User’s Guide
on the context menu and the Display field shows TwinView Display 2:
Analog Monitor (Figure 5.23).
Figure 5.23
TwinView Clone Mode (Display 2 = CRT): Windows 98
Change Resolution: Clone Mode (Virtual Desktop)
You can use the Change Resolution option to modify Resolution and Refresh
Frequency for the secondary display, which allows you to enable Virtual
Desktop, a useful feature for panels and monitors with limited resolution. This
feature lets you pan-and-scan the entire desktop area on the secondary display,
when its resolution is set to less than the value set on the primary display.
Note: If the maximum resolution of the secondary display is less than the
current resolution of the primary display, once you enable Clone mode
from the TwinView panel, Virtual Desktop will already be enabled.
However, you still may want to adjust the resolutions of the primary and/
or secondary device by using the Device Configuration dialog box
(Figure 5.24) for the secondary display or the Windows Settings control
panel of your primary display.
Follow these steps to enable Virtual Desktop:
1 From the TwinView panel, right-click monitor icon 2 (secondary display) to
display the context menu and select Change Resolution to display the
Device Configuration dialog box (Figure 5.24).
DetXP_Features.book Page 37 Thursday, October 11, 2001 3:53 PM