User Guide

NVIDIA Corporation
35
Detonator XP User’s Guide
7 Click OK to view the main TwinView panel showing your TV as the
secondary display (Figure 5.20).
Figure 5.20
TwinView Clone Mode (Display 2 = TV): Windows 98
Switching Secondary to Primary Display: Clone Mode
Note: The example in this section changes DFP or TV from a secondary to a
primary display.
1 Right-click monitor icon 2 (secondary display) to view the context menu.
2 Click Primary to check the option. The context menu is removed.
3 Click Apply. The NVIDIA Control Panel Exit Requirement message
appears.
4 Click OK to remove the message. The screen becomes blank for a few
seconds and the Settings panel appears.
5 Click the Advanced button and then the TwinView tab.
6 To verify that the DFP or TV is now the primary display, right-click monitor
icon 1 to view the context menu.
Primary Display is checked on the context menu and the Display field
shows TwinView Display 1: Digital Flat Panel (Figure 5.21) or TwinView
Display 1: TV (Figure 5.22).
DetXP_Features.book Page 35 Thursday, October 11, 2001 3:53 PM