User Guide

NVIDIA Corporation
33
Detonator XP User’s Guide
Figure 5.17
TwinView Clone Mode Menu (Display 2 = DFP): Windows 98
2
To use the configuration options in the context menu, proceed to the sections
that follow.
Switching Secondary Displays: Clone Mode
Note: This example assumes the primary display is the analog monitor (CRT),
the DFP is the secondary display, and you are switching from DFP to TV. You
can use a similar procedure to switch from TV to DFP as the secondary display.
1 Right-click monitor icon 1 to view the context menu (Figure 5.16). Notice
that the Primary Display option is checked on the context menu and the
Display field indicates that the analog monitor is the primary display.
2 Right-click monitor icon 2 to view the context menu (Figure 5.17). Notice
that Primary Display is not checked on the context menu and the Display
field indicates that the digital flat panel is the secondary display.
3 If you have a TV connected and want to switch to TV as the secondary
display, right-click monitor icon 2 to access the context menu and choose
Select Output Device to display the Device Selection panel.
4 Select the TV option as shown in Figure 5.18 and click Apply. A message
appears indicating that Windows will switch your desktop to the selected
settings.
DetXP_Features.book Page 33 Thursday, October 11, 2001 3:53 PM