User Guide

NVIDIA Corporation
27
Detonator XP User’s Guide
Switching Display Device: Standard Mode
Primary Display
Figure 5.5 on the previous page shows TwinView Standard Mode with analog
monitor as the primary display; Primary Display is checked in the context
menu.
Select Output Device
Note: This section does not apply if you have only one display device attached.
Follow these steps to switch output devices in Standard mode:
1 Right-click the monitor icon to display the context menu (Figure 5.5) and
click Select Output Device to display the Device Selection panel. The
Device Selection panel correctly shows analog monitor as the selected output
device for this example.
Figure 5.7
TwinView Device Selection (Analog Monitor): Windows 98
2
Click the Digital Flat Panel option (Figure 5.8) or the TV option (Figure
5.9) and click Apply.
An NVIDIA display settings message appears, as shown in Figure 5.10
Figure 5.11.
DetXP_Features.book Page 27 Thursday, October 11, 2001 3:53 PM