User Guide

NVIDIA Corporation
123
Detonator XP User’s Guide
Figure 9.22
Desktop Manager: Modified Zoom Hot Keys (Windows 2000)
• Delay before switching zoom monitor: When you move the mouse cursor
from one monitor to the other, the zoomed view automatically switches
monitors after a user-definable time delay (0 to 1000 milliseconds, 500 being
the default). The time delay exists to allow the mouse cursor to briefly
“stray” to the other monitor without a disruptive popping of the zoomed view
from one monitor to the other (and back). The delay can be set to 0 for instant
switching of the zoom window.
Using Zoom
The default magnification level provided by the zoomed view is 8× the regular
view. Using the defined hot-key, the magnification level can range from a
minimum of 2× to a maximum of 32×. However, the easier way to change the
zoom level is by holding down the Ctrl and Alt keys and using the mouse
wheel.
Note: Changing the zoom level using the mouse wheel is currently only
supported under Windows 2000/NT 4.0.
Scrolling the wheel forward (away from you) increases the magnification, and
scrolling backward (towards you) decreases magnification. The current
magnification level will be reset to the default whenever Desktop Manager is
restarted, but will otherwise be maintained within one Windows session.
Figure 9.23 shows part of a zoomed application.
DetXP_Features.book Page 123 Thursday, October 11, 2001 3:53 PM