User Guide

NVIDIA Corporation
99
Detonator XP User’s Guide
Figure 8.4
Overlay Controls Settings: Windows 98
Video Mirror Controls
Note: Be sure to click Apply whenever you make any changes to the control
panels. If changes do not take effect (e.g., the controls have no effect on
the video) after you click Apply, close the video overlay and then re-open
it.
TwinView Clone Mode
Follow these steps to access the Video Mirror settings if you are using
TwinView Clone mode:
1 From the Overlay Controls panel, click Video Mirror Controls to open the
Full Screen Video Mirror Control panel.
The first time you enter this panel, the Disable option is selected and the
Auto-select option is disabled.
2 Click either Primary display or Secondary display to duplicate the video
image on the full screen of your secondary device (such as a TV or DFP) or
primary device (such as your CRT). The other options on this panel become
enabled as shown in Figure 8.5.
DetXP_Features.book Page 99 Thursday, October 11, 2001 3:53 PM