User Guide

NVIDIA Corporation
93
Detonator XP User’s Guide
Figure 7.19
Device Selection: TV Video Output Format
Device Adjustments: TV Output
From the Device Selection panel, click the Device Adjustments button to open
a TV Output panel (Figure 7.20) where you can customize the settings for your
TV display.
Note: Be sure to click Apply after you make any changes in order for the
changes to take effect.
• Screen positioning: Use the arrow buttons to adjust the position of the
desktop on the TV.
Note: If the TV picture becomes scrambled or goes blank due to over-
adjustment, simply wait 10 seconds; the picture will automatically
return to its default position. Then you can begin your adjustments
again. Once you have positioned the desktop where you want it, press
the OK or Apply button to save the settings before the 10 second
interval has elapsed.
• Brightness/Saturation: Use these slider controls to adjust the brightness and
saturation of the TV image.
• Flicker Filter: Use this slider to adjust the amount of flicker filter you want
applied to the TV signal.
DetXP_Features.book Page 93 Thursday, October 11, 2001 3:53 PM