User Guide

90
NVIDIA Corporation
C
HAPTER
7 Device Selection & Configuration
2 Confirm that the Digital Flat Panel option is selected on the Device
Selection panel.
3 Click the Device Adjustments button to access the Flat Panel Display
control panel.
4 Click Monitor Settings to open the Monitor Settings panel (Figure 7.16).
Figure 7.16
Monitor Setting for DFP as Display 2: Windows 2000
Note: The Monitor Settings panel in Figure 7.16 resembles the Monitor panel
for your primary display (Properties > Settings tab > Advanced
button > Monitor tab) but actually represents your secondary display.
The Refresh Frequency list box lists the refresh rates available for this
monitor. You may select a different refresh rate than the one that appears in
the list box. A higher refresh frequency reduces flicker on your screen.
Note: It is recommend that you keep the Hide modes that this monitor
cannot display option checked. Unchecking the option will allow you
to set your display to modes that this monitor cannot display correctly,
which may lead to an unusable display an/or damaged hardware. Also,
unchecking this option will prevent enabling TwinView Span modes.
DetXP_Features.book Page 90 Thursday, October 11, 2001 3:53 PM