Technical Specifications

SUBMITTAL SHEET: Plumbers Caulk™

SPECIFICATIONS:

Plumbers Caulk™

DIRECTIONS FOR USE

Preparation: Surfaces should be clean and dry. Remove loose grout, mortar, dust, and dirt with a

dry brush or rag. Do not use solvents to clean joints unless surfaces can dry thoroughly before

caulk application. Joint depth should not exceed 1/2”. Remove overcap on nozzle and cut off

tip for desired caulk thickness. For best results, apply when ambient temperature is at least 50°F

(10°C).

Application: For tube, squeeze with steady pressure. For cartridge, apply with caulking gun.

Bead may be smoothed with wet finger or tool before caulk dries. For tooling ease, keep tools

moist with soapy water. Wipe off any excess caulk with damp cloth before it dries. Replace

overcap after using. Allow to stand overnight before water contacts new caulk. Can be painted

with latex or oil base paint after 24 hours.

Clean up: Wash hands, tools, and adjacent surfaces with soapy water before caulk dries.

Note: Some brands of caulk are packaged in the same size tubes and cartridges as Hercules

and show a “Net Weight” which is close to Hercules “Fluid Measure”. In all instances, the “Fluid

Measure” package contains substantially more material. Compare package sizes. If they are

the same, know that the one designating “Fluid Measure” gives you more.

PHYSICAL PROPERTIES

Solubility in water: Soluble before curing

Durability: Mildew resistant. Resists UV deterioration

Flexibility: Withstands 121 ⁄2% joint movement

Appearance/color: White: Creamy paste

Clear: Applies white, cures clear. Cure Time: A 1/4 inch bead dries

clear in 36 hours at @ 76°F

Almond/Bone: Creamy paste

Biscuit/Linen: Creamy paste

Odor: Mild acrylic odor (all four finishes)

WARNINGS OR CAUTIONS

 Read all cautions and directions carefully before using product.

 KEEP OUT OF REACH OF CHILDREN.

 DO NOT take internally.

 Avoid eye contact.

 Keep from freezing.

 Keep tube or cartridge capped when not in use.

 WEATHER PRECAUTIONS: As this is a water-based product it should not be exposed to

freezing temperatures. Plumbers caulk will take longer to cure at lower temperatures and

should not be applied below 40°F. Additionally, it should be applied at least one week

before any freezing temperatures are anticipated. At temperatures above 70°F this

product will typically resist normal rainfall after 8 hours