Technical Specifications

SUBMITTAL SHEET: Sta Put Ultra®
2
SPECI
FICATIONS: Sta Put ® Ultra™
SPECIFIC APPLICATIONS*
A professional grade, permanently flexible, malleable sealant specially formulated for use on
marble, granite, natural, or synthetic stone products, cultured marble, plastics, (NO ABS) rubber,
fiberglass, ceramic, enameled, wood, concrete, grout, elastomeric materials and all plumbing
metals.
*For special applications which may not be covered on this or other Oatey literature, please contact Oatey Technical
Services Department by phone [phone], or fax [phone], or visit our technical database web-site at
www.Oatey.com
DIRECTIONS FOR USE
Take out the required amount of Sta Put Ultra and roll between the palms of your hands
to soften and shape the sealant to the form desired. Sta Put Ultra is viscoelastic and will soften as
pressure from the hand is applied. Since Sta Put Ultra has some adhesive qualities, it will be easier
to use a putty knife to scoop out the portion needed. Roll the sealant into a cord like shape to
form into loops for placing around basin cocks, strainers, faucet bases, bowl settings etc.
Overlap the ends of the loops or ends of adjoining lengths to form a continuous seal.
Place the fixture over the bead, attach and tighten down the fasteners for the fixture.
Because of the adhesive qualities of Sta Put Ultra the bead of putty can be applied to either the
framework or the fixture.
In addition to its use as a non-staining plumbers putty Sta Put Ultra can also be used as a
permanently soft and flexible non-pressurized water, air or gas sealant in gaps around wires,
pipes, or vents. The sealant can be used indoors or outdoors, is weather tight, and also resistant
to vegetable and petroleum oils. It can be used to patch small holes and joints in duct work and
many other similar applications where temperatures will not exceed 300°F. Make sure the
surface is clean and oil free before applying. Properly applied, Sta Put Ultra will stay in place
without hardening or drying out and can be easily removed even years later. If product is
difficult to remove from package due to its adhesive nature, use a putty knife to scoop out the
portion needed.
PHYSICAL PROPERTIES
Specific gravity: 1.95 +/- 0.05
Solubility: Insoluble in water, oils or mineral spirits
Appearance: Off white, malleable solid
Texture: Stretchable and slightly tacky
WARNINGS OR CAUTIONS
Never mix Sta Put Ultra with normal types of plumber’s putty - staining will occur.
If used with exotic materials not normally used for countertops or fixtures, ensure your selected
surface is resistant to staining by utilizing a small test sample on a raw piece of stone and
observe effect over 30 minutes. Some staining may occur on very porous surfaces directly
beneath the area being sealed. It will not “bleed” from that area, and will not be visible after
installation.