Submittal Sheet

Oatey Co. | 20600 Emerald Parkway, Cleveland, OH 44135 | 800.203.1155 | Oatey.com
Oatey Co. is part of the Oatey family of companies
BLOCK
™
THREAD
AND GASKET SEALANT
TECHNICAL SPECIFICATION
PRECAUTIONS
Read all cautions and directions carefully before using this product.
• Not for use on natural rubber or synthetic rubber.
• Not for use on lines carrying strong or concentrated acids, alkalis,
oxygen and alcohol based products.
• Keep container closed tightly when not in use. Stir well before using.
• Avoid contact with eyes. Eye contact can cause irritation.
• Harmful if swallowed.
• Prolonged contact may cause skin to dry or crack.
DIRECTIONS
FOR THREADED JOINTS: Wipe away any excess oil or foreign matter
which is on threads. Apply BLOCK to male threads, brushing well into root
of threads. Assemble as usual.
FOR FLANGES AND GASKETS: Apply a uniform coat of BLOCK to mating
side of flanges and/or gasket. Allow to set for five minutes. Then assemble.
MATERIAL SAFETY INFORMATION
FOR MORE INFORMATION ON THIS PRODUCT, REQUEST SAFETY
DATA SHEET
For Delivery by Fax Call 1-800-321-9535
Internet See SDS section of www.Oatey.com
HMIS
®
ratings
Health: 2
Flammability: 2
Physical hazard: 0