Product Overview

Pro dope
Thread Sealant
Spec Sheet #S00012
Hercules Chemical Company, Inc.
111 South Street, Passaic, NJ 07055-9100
Phone: [phone] • Fax: [phone]
e-mail: [e-mail]
http://www.herchem.com
©1998 JZEL
APPROVALS AND LISTINGS
SPECIFIC USES
For Delivery by Fax Call 1-800-942-4636
Internet See MSDS section of
www.herchem.com
Mail Contact Hercules at address below or
any Hercules representative
SPECIFIC APPLICATIONS
Pro Dope can be used on these materials:
Aluminum, Black Iron, Galvanized Steel, Brass, Copper,
Glass, Monel, Stainless Steel and many others*.
PHYSICAL PROPERTIES
Pressure Rating: Liquids 250 psi
Air/Steam 200 psi
Temperature Performance 0°F to 350°F
Brushability to -15°F
WARNINGS OR CAUTIONS
Not recommended for oxygen lines and L.P.(liquefied
petroleum) gas lines. Keep from freezing. Do not use on
threaded plastic pipes (use Hercules Real Tuff
TM
or
Megaloc
TM
).
DIRECTIONS FOR USE
Remove excess cutting oil from threads and apply Pro Dope
to clean male threads. Brush well into the roots of the
threads to insure a leak free joint. Then complete the
connection as usual.
MATERIAL SAFETY INFORMATION
FOR MORE INFORMATION ON THIS PRODUCT,
REQUEST MATERIAL SAFETY DATA SHEET (MSDS) #12.
This product is not classified as hazardous in accordance
with 29 CFR OSHA 1910.1200.
HMIS Hazard Warning 0-0-0-A.
INGREDIENTS CAS#
NJ-T.S.R. #31348300 5005P, 5006P, 5007P, 5008P & 5009P
* For special applications which may not be covered on this
or other Hercules literature, please contact Hercules
Technical Services Department by phone at
1-800-221-9330 or send a fax to 1-800-333-3456.
Pro Dope can be used
on lines carrying:
Acids-Dilute
Air (compressed
gaseous)
Ammonia Anhydrous
Ammonia Gaseous
Brine
Carbon Dioxide
Castor Oils
Caustic Alkalies (dilute)
Helium Gaseous
Inert Gases
Natural Gas
Nitrogen Gaseous
Soap Liquid
Steam Lines
Vegetable Oils
Water (hot & cold)
And many other uses*
Meets MIL. SPEC. TTS-1732 and MIL-A-12352A(CE)
Standard 61 for
potable water
®