Specification Sheet

Visit www.oatey.com for updates
TECHNICAL SPECIFICATION: Hercules Megatape provides a clean, positive seal on threaded connections. Megatape is an
all-purpose thread sealing tape and can be used with plastic, brass, copper, aluminum, stainless steel, galvanized steel or black
iron piping. Its high density and 3.5 mil thickness make it the perfect choice for Plumbing Professionals.
Hercules®
Megatape
COMMON APPLICATIONS
Hercules Mega Tape can be used on plastic, brass,
copper, aluminum, stainless steel, galvanized steel or
black iron piping.
NOT FOR USE WITH LINES CARRYING OXYGEN.
Consult Oatey Technical Department for applications not
specifically referenced above.
INGREDIENT
Virgin PTFE
When used for the intended end use application, this
product is considered an “article” as defined in
OSHA 29 CFR 1910.1200(c).
APPROVALS AND LISTINGS
Meets UL 31 RO and 7N15 MH18499
PRODUCT NUMBER
DESCRIPTION
UPC
15100
½” X 1000”, 3.5 mil Thick Grey PTFE Tape
50032628151005
15110
3/4” X 1000”, 3.5 mil Thick Grey PTFE Tape
50032628151104
15120
1” X 1000”, 3.5 mil Thick Grey PTFE Tape
50032628151203
1/2014
PHYSICAL/CHEMICAL PROPERTIES
Appearance Gray Tape
Density 0.70 to 1.00 g/c
3
Pressure Rating* 10,000 psi
Temperature Range -450° F to 500° F
Tensile Strength 1245 to 2500 psi
Thickness 0.0035”
Shelf Life Indefinite
*Pressure rating is relative to the torque and quality of the threads
and the amount of tape used.
DIRECTIONS FOR USE
For threads up to 1-½” diameter, use ½” width of thread
seal tape. For larger diameter threads, use ¾” or 1” width
of thread seal tape. Clean the male and female threads of
any oil or dirt. Apply the thread seal tape a minimum of
three wraps, using care to wrap in the direction of the
thread rotation. Be sure to keep tension on the tape while
wrapping. Do not overlap the tape on the ends of the
fitting.
PRECAUTIONS
Read all cautions and directions carefully before using this
product. Store spool in clean place and keep cover on the
spool when not in use.