Installation & Assembly

①

③

②

①hollow wall anchor

②Washers

③2-9/16” Lag Screws

②Spacer

①Nuts

①

②

③Washers

④track bolt

Step 7: Attach Brackets to the Wall

a.Loosely attach each bracket to the wall with Short Lag Screws and washers (and

hollow wall anchors if needed).

b.Fully tighten all Lag Screws with your ratchet. Don’t overtighten screws as you may

strip the studs or anchors.

Step 8: Install the Outside Track

Using the spacers, Track Bolts, Washers and Nuts attach the outside Track to the

Bypass Bracket as shown in the illustrations below.

Step 9: Install Your Doors

Lift and hang your doors on the Track, and then twist the Anti-Jump Pad toward the

wall so that it is under the Track.

Hanging and Positioning Doors

twist the Anti-Jump

Pad toward to the wall

③

④