Instructions / Assembly

ManualsBrandsHENX ManualsCordless Hedge Trimmers40V Electric Cordless 24 in. Multi-Colored Pole Hedge Trimmer with Charger and Battery

27

PROBLEM

CAUSE

SOLUTION

Excessive vibration or noise.

1. dry or corroded blades.

1. Lubricate the blades,

following the section

“LUBRICATING THE

BLADE” found on page 25

in this manual.

2. Blades or blade support

is bent.

2. Replace with a new blade

or support. Contact

HENX service center

for blade or support

replacement

service, found on page 30.

3. Bent or damaged teeth.

3. Replace with a new blade.

contact HENX service

cen- ter for blade

replacement

service,

found on page 30.

4. Loose blade bolts.

4. Tighten the blade bolts.

Using a 5/16" wrench,

turn the bolt clockwise

to tighten.