Instructions / Assembly

20
To Start The Hedge Trimmer
Your hedge trimmer is equipped with two switch levers. Both switch levers need to
be pressed for the hedge trimmer to start. After the battery pack is mounted,
press the “On/Off” button; depress and hold the switch lever in the front handle and
press the lock-off button and the switch lever in the rear handle at the same
time to start the hedge trimmer.
To Stop The Hedge Trimmer
Move hedge trimmer away from cutting area, release one of the switch levers and
press the “On/Off” button to stop the hedge trimmer.
WARNING: Always remove the battery pack from the hedge trimmer during
work breaks and after finishing work.
Using The Hedge Trimmer
WARNING: if the blade jams on any electrical cord or line, do not touch the
blade! it can become electrically live and very dangerous. continue to hold the hedge
trimmer by the insulated rear handle or lay it down and away from you in
a safe manner. disconnect the electrical service to the damaged line or cord before
attempting to free the blade from the line or cord. Failure to heed this warning will
result in serious personal injury or possible death.
WARNING: if any parts are missing, damaged or broken, do not operate your
trimmer until they have been replaced. Failure to do so could result in possibly serious
personal injury.
WARNING: To prevent serious personal injury, always use both the front handle
and the rear handle to hold the hedge trimmer during operation.